Filter
Top Products
9
Tab 6, 14English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Tab 8, 16Tab 7, 15
3. Check to be sure the SoundLink
®
USB key power light turns on and begins to flash.
4. Wait for your computer to recognize the SoundLink
®
USB key. It may take up to 20 seconds
the first time.
CONNECTING appears on the Acoustic Wave
®
system display, and lights on the USB key
and SoundLink
®
adapter flash rapidly. The Acoustic Wave
®
system emits a brief beep when
the SoundLink
®
connection is ready for use.
5. After the connection is made, you may need to set your computer’s audio output device.
See page 12.
Note: If PRESS PLAY TO CONNECT appears on the front panel display, try making the
connection manually. See “Manually linking the SoundLink
®
adapter and USB key” on page 10.
Disconnecting the computer
Press the button on the end of the SoundLink
®
USB key. Then remove the USB key from the
computer USB port.
Reconnecting the computer
Make sure your Acoustic Wave
®
music system is turned on and COMPUTER appears on the
system display. When you plug the SoundLink
®
USB key into the USB port on your computer,
it will automatically reconnect to your Acoustic Wave
®
system. If you have problems connecting,
see “Troubleshooting” on page 16.