Filter
Top Products
Maintenance 29
3.2 Media Width Adjustment
The Thumbwheel on the side of the Printhead Carrier allows the Printhead
to be adjusted for media narrower than the width of the Printhead. The
numbers on the Thumbwheel do not correspond to a particular media
width but serve only as a reference point.
Figure 3-2 Adjusting Media Width
1. Load the Printer with the chosen media.
2. Begin printing labels. The internal Test Pattern Label can be used or
any other label sent from the Host.
3. Rotate the Thumbwheel left
until the print quality along
edge starts to lighten.
4. Then rotate the Thumbwheel
right just enough to achieve
uniform print quality across
the label.