Filter
Top Products
ENTERPRISE & MOBILITY DEPLOYMENT GUIDE
Deploying Brocade Mobility Products with the Brocade FastIron CX Series Page 9 of 16
3. Configure the basics.
a. Hostname:
CX_SW(config)#hostname RSL_RACK_1_SW
b. Banner:
RSL_RACK_1_SW(config)#banner Wireless Lab
4. Set the management VLAN IP address for Telnet.
a. Set VLAN 1:
RSL_RACK_1_SW(config)#vlan 1
RSL_RACK_1_SW(config-vlan-1)#
b. Enable management VLAN:
RSL_RACK_1_SW(config-vlan-1)#management-vlan
c. Enable telnet on management VLAN1:
RSL_RACK_1_SW(config)#telnet server enable vlan 1
d. Set the Telnet password:
RSL_RACK_1_SW(config)#enable telnet password password
5. Set the default gateway:
RSL_RACK_1_SW(config)#vlan 1
RSL_RACK_1_SW(config-vlan-1)#default-gateway 10.1.1.1 1
Step 4: Configure VLANs
1. Create a wireless VLAN:
RSL_RACK_1_SW(config)#vlan 20
RSL_RACK_1_SW(config-vlan-20)#
2. Tag wireless VLAN ports:
RSL_RACK_1_SW(config-vlan-20)#tagged ethernet 1/1/20