Filter
Top Products
99
5
5
You can correct most problems by yourself. If you need additional help, the Brother Solutions Center offers
the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com/
.
Identifying your problem 5
First, check the following: 5
The AC power cord is connected properly and the machine is turned on.
All of the protective parts have been removed.
The toner cartridge and drum unit is installed properly.
The front cover, back cover, and fuser cover are completely closed.
Paper is inserted properly in the paper tray.
The interface cable is securely connected to the machine and the computer.
The correct driver for the machine has been chosen and is installed.
The computer is set up to connect to the correct machine port.
Machine does not print:
5
If you did not solve your problem with the above checks, identify your problem and then go to the page
suggested below.
Machine's LEDs are flashing
See LEDs (Light Emitting Diodes) on page 53.
Status Monitor Error Message appears
See Error messages in the Status Monitor on page 100.
Paper handling
(See Paper handling on page 102 and Paper jams and how to clear them on page 104.)
Other problems
(See Other problems on page 119.)
Pages are printed, but there are problems with:
5
Print quality
(See Improving the print quality on page 111.)
Printout is incorrect
(See Solving print problems on page 118.)
Troubleshooting 5