Filter
Top Products
Printing Methods
17
1
d Using both hands, slide the manual feed paper guides to the width of the paper that you are going to use.
e Using both hands, put one full sheet of labels or one envelope in the manual feed slot until the front edge
touches the paper feed roller. When you feel the machine pull it in, let go.
Note
• Put one full sheet of labels or one envelope into the manual feed slot with the side to be printed face up.
• Make sure that the full sheet of labels or the envelope is straight and in the proper position on the manual
feed slot. If it is not, it may not be fed properly, resulting in a skewed printout or a paper jam.
• DO NOT put more than one full sheet of labels or one envelope in the manual feed slot at any one time,
as it may cause a jam.
• DO NOT insert a labels sheet that has previously been used or is missing any labels.
• If you put any Media (paper, envelope and so on) in the manual feed slot before the machine is in the
Ready mode, the media may be ejected without being printed on.