Filter
Top Products
20
Configuration methods
2
Manual configuration for a Wi-Fi Direct network 2
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network
manually.
a Press Menu.
b Press a or b to choose Network.
c Press a or b to choose Wi-Fi Direct.
d Press a or b to choose Manual.
e When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
f When Other Network I/F will be disabled.Do you want to continue? is displayed,
press OK to accept.
To cancel, press Cancel.
g The machine will show the SSID name and Password for 2 minutes. Go to the wireless network settings
page of your mobile device and input the SSID name and password.
h If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device
or scanning to your mobile device, you can download the
Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center
(http://solutions.brother.com/).
If the connection failed, see Troubleshooting uu page 21.