Filter
Top Products
25
4
4
Wi-Fi Direct network terms 4
Group Owner (G/O) 4
If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi
Direct network. The G/O assigns a SSID name, password and IP address for the Wi-Fi Direct network. The
default setting is Off.
Device Information 4
Device Name 4
You can check the device name of the machine in the Wi-Fi Direct network environment. The device name
will be shown as HL-xxxx** or MFC-xxxx** (where xxxx is your model name and ** is the character string
assigned by your Brother machine).
SSID 4
This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the
SSID name.
IP Address 4
This field displays the current IP address of the machine assigned by the G/O.
Status Information 4
Status 4
This field displays the current Wi-Fi Direct network status. When your machine is a G/O, the machine shows
G/O Active(**) (where ** shows the number of devices). When your machine is a client, the machine
shows Client Active. If you see Off, your machine's Wi-Fi Direct interface is disabled.
Signal
4
This field displays the current Wi-Fi Direct network signal strength.
Channel (For HL-5470DW(T) and HL-6180DW(T)) 4
This field displays the current Wi-Fi Direct network channel.
Speed (For HL-5470DW(T) and HL-6180DW(T))
4
This field displays the current Wi-Fi Direct network speed.
Glossary 4