Filter
Top Products
11
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1 Make sure that the printer’s power switch is
off.
Connect the AC power cord to the printer.
2 Plug the AC power cord into an AC power
outlet/socket.
Turn the printer’s power switch on.
3 After the printer has finished warming up,
the READY message appears.
4 Press the Go button. The printer prints a
test page.
Check that the test page has printed
correctly.
4 Print a Test Page
Go to the next page
Setting Up
Your Printer
Windows
®
USB
Windows
®
Parallel
Windows
®
Network
Macintosh
®
USB
Macintosh
®
Network
For
Administrators
Installing the Driver