Brother 1800 Printer User Manual


 
81
LINE
LIMIT!
This message appears if
the number of lines in the
text is greater than the
maximum number of
lines possible for the
installed tape.
Reduce the number of
lines or install a tape of
greater width.
MEMORY
FULL!
This message appears if
you try to store a text file
after 300 characters have
already been stored in the
memory.
Delete an unwanted file
to make room for the new
one.
NO
FILES!
• This message appears if
you try to recall or delete
a text file from the mem-
ory when none are stored.
Store a text file first.
NUMBER
TOO SMALL!
This message appears if
the number that is set to
be printed using the
Numbering function is
less than the number
above the cursor.
Press the key of a number
that is greater than the
number in the text.
ROM
PROBLEM!
This message appears if
there is a problem with
the machine’s read only
memory.
Contact your service rep-
resentative.
REPLACE
BATTERIES!
This message appears if
the installed alkaline bat-
teries are about to run
out.
Replace the batteries or
use the AC adaptor.
SYSTEM
ERROR!
This message appears if
there is a problem with
the machine’s software.
Contact your service rep-
resentative.
Error Message Cause Remedy