Filter
Top Products
42
b Touch the desired destination, and then select
the desired pattern.
• To recall data from a USB flash drive, plug the USB
flash drive into the USB port on this machine.
a Recall from the machine’s memory.
X Touch the pattern to be recalled and display a
preview of the pattern layout.
b Recall from a USB flash drive.
X If there are folders on the USB flash drive, touch a
folder to display the list of patterns that it
contains.
• If there are many folders or patterns, touch the
arrows keys in the screen to scroll up or down.
Note
• If the name of the data file/folder cannot be
identified, for example, when the name contains
special characters, the file/folder is not
displayed. If this occurs, change the name of
the file/folder. We recommend using the 26
letters of the alphabet (uppercase and
lowercase), the numbers 0 through 9, “-” and
“_”.
X Touch the pattern to be recalled and display a
preview of the pattern layout.
c Check the preview of the pattern layout in the
screen, and then touch the “OK” key.
a Touch to return to the list of patterns at the
destination.
b Touch to delete the data for the displayed
pattern layout.
c Touch to recall the pattern layout data.
d Touch to display the patterns enlarged.
Memo
• Even if a seam allowance has been saved with
the pattern(s) (see “Cutting Around Drawings”
on page 44), the “Seam Allowance” setting
specified in the settings screen will have priority
and will be applied. If necessary, adjust the
“Seam Allowance” setting in the settings screen
(see “Seam Allowance” on page 24).
ab
a
b
c
d