Brother DCP-J725DW All in One Printer User Manual


 
Control panel setup
37
4
WLAN Status 4
Status 4
This field displays the current wireless network status.
Signal 4
This field displays the current wireless network signal strength.
SSID 4
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID
name.
Comm.Mode 4
This field displays the current wireless network communication mode.
Ethernet (For MFC-J825DW/J835DW and DCP-J925DW) 4
Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T
full or half duplex mode by auto negotiation.
Note
If you set this value incorrectly, you may not be able to communicate with your print server.
MAC Address 4
The MAC address is a unique number assigned for the machine's network interface. You can check your
machine's MAC address from the control panel.
Network I/F (For MFC-J825DW/J835DW and DCP-J925DW) 4
You can choose the network connection type, wired network connection or wireless network connection. If
you want to use the wired network connection, choose Wired LAN, and if you want to use the wireless
network connection, choose WLAN. You can only have one network connection type active at a time.