Filter
Top Products
Internet fax
56
6
How to Internet fax 6
Before using an Internet fax you must configure your Brother machine to communicate with your network and
mail server. You must ensure the following items of your machine. You can configure these items from the
control panel, Web Based Management, Remote Setup or BRAdmin Professional 3. If you are unsure of any
of these items, please contact your systems administrator.
E-mail address
SMTP, POP3 server address/port/Authentication method
mailbox name and password
Sending an Internet fax 6
Before sending an Internet fax 6
To send the Internet fax, you can configure following items from the control panel, Web Based Management
or Remote Setup.
Sender Subject (if needed)
Size Limit (if needed)
Notification (if needed) (For more information, see TX Verification Mail uu page 61)
How to send an Internet fax 6
Sending an Internet fax is the same as sending a normal fax. (For more information, see the Basic User’s
Guide.) If you have already programmed the addresses of the destination Internet fax machines as
Speed-Dial, you can send the Internet fax by loading the document into the machine.
Note
• If you wish to manually enter the Internet fax address, load the document into the machine and press .
Press to choose numbers, characters or special characters. Enter the address and press OK, and then
press Black Start/Mono Start or Color Start/Colour Start.
For more information on how to enter text, see the Quick Setup Guide.
• You can register the E-mail address information from Web Based Management or Remote Setup.
After the document is scanned, it is transmitted to the recipient Internet fax machine automatically via your
SMTP server. You can cancel the send operation by pressing the Stop/Exit key during scanning. After the
transmission is finished, the machine will return to standby mode.