Filter
Top Products
5 - 9
SETUP RECEIVE
Setup for Polling Receive with Secure Code
You need to make sure you are using the same ID number as the other party.
1
Press Function/Set, 2, 5.
2
Press or to choose SECURE and press
Function/Set.
3
Enter a four-digit number.
This is the same as the security code of the fax machine you are polling.
4
Press Function/Set.
5
The screen prompts you to enter the fax number you want to poll, and then to press
Start.
6
Enter the fax number, and press Start.
Setting Up Sequential Polling Receive
(For FAX-335MC Only)
Your fax machine can request documents from several fax units in a single operation.
Afterward, a Sequential Polling Report will be printed.
1
Press Function/Set, 2, 5.
The screen displays:
2
Press or to select Polling
STANDARD, SECURE or TIMER, and press Function/Set when the screen
displays the setting you want.
3
If you selected STANDARD, the screen prompts you to enter the fax number you
want to poll, and then to press Start.
• If you selected SECURE, enter a four-digit number and press Function/Set.
• If you selected TIMER, enter the time (in 24-hour format) you want to begin polling
and press Function/Set.
4
Specify the destination fax machines, which you wish to poll by using One Touch,
Speed Dial or a Group. For example, for One Touch 3 and Speed Dial location 09,
press One Touch Dial key
3, Search/Speed Dial, # and 09.
5
Press Start.
Your fax machine will poll each number or
group member in turn for an original.
POLLING:SECURE
SELECT <- -> & SET
POLLING:STANDARD
ACCEPTED
DIALING