Filter
Top Products
Setting Up the Machine
13
15 Installing the battery
1 Insert the connector (1) of the battery (2) in the
direction shown below.
2 Place the battery in the position shown.
3 Install the battery cover by sliding it onto the
back of the handset.
Note
• Be careful that you do not catch the battery
connector cord.
4 Charge the batteries by leaving the cordless
handset in the cradle for at least 12 hours
before you use it. You can continue to set up
the handset during this time.
16 Charging the battery
1 Place the cordless handset on the cradle with
the dial pad facing forward.
Note
• After installation, you should set the date and time.
(See Data and Time in the Digital Cordless
Handset User’s Guide.)
• The LCD of the handset will display “Searching for
Base Unit” or “Base Unit not detected” until the
initial setup of the machine is complete.
• If the battery charge level is getting low, you
should charge the battery. You can see the battery
charge level indicator at the bottom right of the
LCD.
1
2