Filter
Top Products
Glossary
G - 2
ECM (Error Correction Mode) Detects errors during fax
transmission and resends the pages of the fax that had an
error.
Extension telephone A telephone on the fax number that is
plugged into a separate telephone wall socket.
External telephone A TAD (telephone answering device) or
telephone that is connected to your fax machine.
F/T Ring Time The length of time that the Brother fax machine
rings (when the receive mode setting is FAX/TEL) to notify you
to pick up a voice call that it answered.
Fax Detect Enables the fax machine to respond to CNG tones if
you interrupt a fax call by answering it.
Fax Forwarding Sends a fax received in memory to another
pre-programmed fax number.
Fax Receive Code Press this code ( 5 1 or 9 1 for New
Zealand) when you answer a fax call from an extension or
external phone.
Fax Storage You can store faxes in memory.
Fax tones The signals sent by sending and receiving fax
machines while communicating information.
FAX/TEL You can receive faxes and telephone calls. Do not use
this mode if you are using a telephone answering device
(TAD).
Fine resolution Resolution is 203 x 196 dpi. It is used for small
print and graphs.
Group number A combination of One-Touch and/or Speed-Dial
numbers that are stored on a One-Touch key for Broadcasting.
LCD (liquid crystal display) The display screen on the fax
machine that shows interactive messages during On-Screen
Programming and shows the date and time when the fax
machine is idle.
Manual fax When you lift the handset or press Speaker Phone
(FAX-837MC only) so you can hear the receiving fax machine
answer before you press Fax Start to begin transmission.
Menu mode Programming mode for changing your fax machine’s
settings.
Next Fax Reservation (for FAX-827/837MC) Accepts the next
document in the ADF for transmission while the fax machine is
still receiving.
One-Touch Keys on the fax machine’s control panel where you
can store numbers for easy dialling. You must use a separate
key for each number.
Out of Paper Reception Receives faxes into the fax machine’s
memory when the fax machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Pause Allows you to place a 3.5 second delay in the dialling
sequence stored on One-Touch keys or Speed-Dial numbers.