Brother FAX-335MC Fax Machine User Manual


 
6 - 2
SETUP SEND
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before
sending the fax.
1
Place the original face down in the ADF.
2
Pick up the handset and listen for a dial tone
ORpress Hook or Speaker Phone and listen for a dial tone.
3
Enter the fax number you want to call. (You can enter the digits using the dial pad, or
you can enter a One Touch or Speed Dial number or you can call using
Search/Speed Dial.) (See One Touch Dialing, page 7-5 and Search, page 7-6.)
4
When you hear the fax tone, press Start.
5
If youre using the handset, hang up.
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset, nor press Hook or Speaker Phone.
1
Place the original face down in the ADF.
2
Enter the fax number using One Touch, Speed Dial, Search or the dial pad. (See One
Touch Dialing, Speed Dialing and Search, page 7-5 to 7-5.)
3
Press Start.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the
number.
If youre sending a fax automatically and the line is busy, the fax machine will redial
automatically up to three times at five minute intervals.
Memory Transmission (For FAX-335MC Only)
This feature allows your machine to scan a fax into its memory and send it as soon as
the scan is complete. This way, you dont have to wait for the entire fax to be
transmitted before you retrieve your original.
1
Place the original face down in the ADF.
2
Press Function/Set, 3, 9.
3
To change the default setting, press or
to select ON (or OFF) and press
Function/Set. Go to Step 5ORFor the
next fax transmission only, press or to
select NEXT FAX ONLY and press Function/Set.
4
For the next fax only, press or to select ON (or OFF) and
press Function/Set.
9.MEMORY TX
SELECT <- -> & SET
MEMORY TX:ON