Brother HL-1230, HL-1440, HL-1450, HL-1470N Printer User Manual


 
CHAPTER 6 TROUBLESHOOTING
6-4
E
E
r
r
r
r
o
o
r
r
M
M
e
e
s
s
s
s
a
a
g
g
e
e
P
P
r
r
i
i
n
n
t
t
o
o
u
u
t
t
s
s
The printer will report problems by printing an error message as defined in the
following table. Take the corrective actions for the error message.
Error message Action
MEMORY FULL
Press the control panel button to print the data remaining in the
printer.
Reduce the print resolution or reduce the complexity of your
document.
(For HL-1440, HL-1450 and HL-1470N Users)
Expand the printer memory by adding a commercially available
SIMM. See Installing Additional Memory in Chapter 4.
PRINT OVERRUN
Press the control panel button to print the data remaining in the
printer.
If this does not clear the error, reduce the complexity of your
document or reduce the print resolution.
(For HL-1440, HL-1450 and HL-1470N Users)
Expand the printer memory by adding a commercially available
SIMM. See Installing Additional Memory in Chapter 4.
Set page protection to ON by using the supplied Windows driver
or RPC program.
Change the following settings in the supplied Windows driver
and try again. The best combination of settings below will vary
depending on your document.
Graphics Mode
True Type
TM
mode
Use Printer True Type
TM
Fonts
RESOLUTION ADAPTED
(The printer has printed
the document at a reduced
resolution)
Reduce the complexity of your document before you print to
prevent automatic reduction in the resolution.
(For HL-1440, HL-1450 and HL-1470N Users)
Expand the printer memory by adding a commercially available
SIMM. See Installing Additional Memory in Chapter 4.