Filter
Top Products
Driver and Software
37
2
Print Quality 2
You can choose the following print quality settings.
Normal
600×600 dpi. Recommended for ordinary printing. Good print quality with reasonable print speeds.
Fine
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs. Since
the print data is much larger than in normal mode, processing time / data transfer time and printing time
will be longer.
Note
• The print speed will change depending on what print quality setting you choose. Higher print quality takes
longer to print, while lower print quality takes less time to print.
• The HL-3040CN when printing in Fine mode may show Out of Memory, if this should happen add more
memory, see Installing extra memory on page 100.
Colour/Mono 2
You can change the Colour/Mono settings as follows:
Colour
When your document contains colour and you want to print it in colour, select this mode.
Mono
Select this mode if your document has only black and greyscale text and/or objects. If your document
contains colour, selecting Mono mode prints your document in 256 levels of grey.
Auto
The printer checks the content of your documents for colour. If colour is detected, it prints in colour. If no
colour content is detected, it prints in monochrome. The total printing speed may become slower.
Note
If the Cyan, Magenta or Yellow toner reaches the end of its life, choosing Mono will allow you to keep
printing as long as the Black toner does not reach the end of its life.