Brother HL-3040CN Printer User Manual


 
Control Panel
82
3
Using the control panel LCD menu 3
When you use the Menu keys (+, -, OK or Back), remember the following basic steps:
If no control panel operations are performed for 30 seconds, the LCD automatically returns to Ready.
When you press OK to choose a setting, Accepted appears on the LCD. After that, the LCD returns to
the previous menu level.
When you press Go to choose a setting, Accepted appears on the LCD. After that, the LCD returns to
the Ready state.
After changing the status or a setting, pressing Back before you press OK will cause the LCD to return to
the previous menu level with the original settings unchanged.
There are two ways to input numbers. You can press + or - to scroll up or down one number at a time, or
you can hold down + or - to scroll faster. The blinking number is the one that you can change.
For example: If you want to choose the paper size for Tray 1, as follows. 3
a Press any of the Menu buttons (+, -, OK or Back) to take the printer offline.
Ready
h
Machine Info.
b Press + or - to choose Paper Tray.
Paper Tray
c Press OK to move to the next menu level.
Manual Feed
d Press + or - to choose Tray1 Size.
Tray1 Size
e Press OK to move to the next menu level.
Any l
f Press + or - to choose the paper size.
A4
g Press OK or Go.
Accepted appears on the LCD.
Accepted