Filter
Top Products
Printing Methods
16
1
d Put envelopes in the MP tray and make sure:
The envelopes stay under the maximum paper mark (1).
The envelope edge positions between the arrows (2).
The side to be printed on must be face up.
Note
Do not put more than 3 envelopes in the MP tray at any one time, as it may cause a jam.
e Open the back cover (face-up output tray).
f Pull down the two gray levers, one on the left-hand side and one on the right-hand side, to the envelope
position as shown in the illustration below.
1
2