Filter
Top Products
USER’S GUIDE
1-6
OPERATING AND STORAGE ENVIRONMENT
Please take note of the following before using the machine.
Power Supply
Use the machine within the specified power range.
AC power: ±10% of the rated power voltage in your country
Frequency: 50/60 Hz (220 V– 240 V) or 50/60 Hz (110–120 V)
The power cord, including extensions, should not exceed 5 meters (16.5
feet).
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier, shredder and so on. If it is
unavoidable that you must use the machine with these appliances, it is
recommended that you use an isolation transformer or a high-frequency
noise filter.
Use a voltage regulator if the power source is not stable.
Environment
The machine should be installed near a power outlet which is easily
accessible.
Use the machine only within the following ranges of temperature and
humidity.
Ambient temperature: 10°C to 32.5°C (50°F to 90.5°F)
Ambient humidity: 20% to 80% (without condensation)
The machine should be used in a well ventilation room.
Place the machine on a flat, horizontal surface.
Keep the machine clean. Do not place the machine in a dusty place.
Do not place the machine where the ventilation hole of the machine can
be blocked.
Do not place the machine where it is exposed to direct sunlight. Use a
blind or a heavy curtain to protect the machine from direct sunlight when
the machine is unavoidably set up near a window.
Do not place the machine near devices that contain magnets or generate
magnetic fields.