Filter
Top Products
CONFIGURING INTERNET PRINTING FOR WINDOWS
®
3 - 6
NC9100h_FM6.0
7
You will then see a message about Partial E-mail Print. Partial
E-mail Print is the ability of the Brother Internet Print software to
break down E-mail Print jobs into smaller sections to prevent a
mail file size limitation problem for the mail server.
8
Press OK to continue.
9
You will then be asked to enter the port settings for the remote
Print/Fax server:
Enter any unique legal Internet E-mail address for the remote
Print/Fax server (for example emailprinter@xyz.com). Note that
Internet E-mail addresses cannot have spaces in them.
Enter your E-mail address and the IP address of your SMTP
E-mail server (consult your network administrator if you do not
know this address). Also specify if you are going to use the
Partial E-mail Print option and the Notification type.
10
Press OK to continue. You will then be asked to re-start your
computer.
11
Once your computer has re-started you must create a printer on
your Windows
®
98/Me/2000/XP system using the standard
Windows
®
98/Me/2000/XP printer setup procedure. To do this,
go the Start button, select Settings and then Printers
(Windows
®
98/Me/2000/XP). To do this, go to the Control
Panel, select Printers and Other Hardware and then Printers
and Faxes (or Add a printer)(Windows
®
XP)
12
Select Add Printer to begin the printer installation.
13
Click Next when you get the Add Printer Wizard window.
<For Windows
®
98/Me users>
14
Select Local Printer when you are asked how the printers are
connected to your computer and push Next.
<For Windows
®
2000/XP users>
14
Select Local Printer, and then delete the check mark in Plug
and Play check box.