Filter
Top Products
1 - 5 CONTROL PANEL SETUP
NC9100h_FM6.0
IP Address
This field displays the current IP address of the machine. If you have
selected a BOOT Method of Static, enter the IP address that you
wish to assign to the machine (check with your network manager for
the IP address to use). If you have selected a method other than
Static, the machine will attempt to determine its IP address using the
DHCP or BOOTP protocols. The default IP address of your machine
will probably be incompatible with the IP address numbering scheme
of your network. We recommend that you contact your network
manager for an IP address for the network the unit will be connected
on.
1
Press Menu/Set, 5, 1, 2 for MFC-3340CN/MFC-5840CN. (4,
1, 2 for FAX-1940CN/MFC-5440CN)
2
Select 1.Change and enter the IP address.
3
Press Menu/Set.
4
Press Stop/Exit.
Subnet Mask
This field displays the current subnet mask used by the machine. If
you are not using DHCP or BOOTP to obtain the subnet mask, enter
the desired subnet mask. Check with your network manager for the
subnet mask to use.
1
Press Menu/Set, 5, 1, 3 for MFC-3340CN/MFC-5840CN. (4,
1, 3 for FAX-1940CN/MFC-5440CN)
2
Select 1.Change and enter the Subnet Mask address.
3
Press Menu/Set.
4
Press Stop/Exit.
When the Boot Method is set to “Auto”, the machine cannot
receive IP address from a BOOTP server in Windows
®
2000.
So please ensure that you use DHCP for Windows
®
2000
server.