Filter
Top Products
Installing the Driver & Software
26
STEP 2
Macintosh
®
Network
Macintosh
®
8 The Brother software will search for the Brother
device. During this time the following screen
will appear.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
OK. This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically. Go to step 9.
• If this screen appears click OK.
• Enter a name for your Macintosh
®
in
Display Name up to 15 characters long and click
OK. Go to step 9.
• If you want to use the machine’s Scan key to scan
over the network you must chek the
Register your computer with the "Scan To"
function on the machine. box.
• The name you enter will appear on the machine’s
LCD when you press the Scan key and choose a
scan option. (For more information, see Network
Scanning in the Software User’s Guide on the
CD-ROM.)
9 Click Add.
Note
For Mac OS X 10.4 users, go to step 12.
10 For Mac OS
®
X 10.2.4 to 10.3.x users:
Make the selection shown below.
11 Choose MFC-XXXX (where XXXX is your
model name), and then click Add.
Go to step 13.
12 For Mac OS
®
X 10.4 users:
Choose MFC-XXXX (where XXXX is your
model name), and then click Add.