Security features
13
2
Turning Setting Lock on/off 2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Setting Lock on
a Press Menu, 1, 8, 2.
18.Security
2.Setting Lock
a On
b Set Password
Select ab or OK
b Press a or b to choose On.
Press OK.
c Enter your four-digit password.
Press OK.
d Press Stop/Exit.
Turning Setting Lock off
a Press Menu, 1, 8, 2.
18.Security
2.Setting Lock
Password:XXXX
Enter & OK Key
b Enter your four-digit password.
Press OK twice.
c Press Stop/Exit.
Restricting dialing 2
This feature is to prevent users from sending
a fax or calling a wrong number by mistake.
You can set the machine to restrict dialing
when you use the dial pad, One Touch,
Speed Dial and LDAP search
1
.
If you choose Off, the machine does not
restrict any dialing method.
If you choose Enter # twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialing. If you
re-enter the wrong number, the LCD will
show an error message.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialing method.
1
LDAP is included with MFC-8810DW and
MFC-8910DW. LDAP is available as a download for
MFC-8510DN and MFC-8710DW. You can
download LDAP from the Brother Solutions Center
at: http://solutions.brother.com/
.
Dial pad restriction 2
a Press Menu, 2, 6, 1.
26.Dial Restrict.
1.Dial Pad
a On
b Off
Select ab or OK
b Press a or b to choose On, Off or
Enter # twice.
Press OK.
c Press Stop/Exit.