Brother MFC-9440CN Printer User Manual


 
For Network Users
29
3
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
•The User Name is
admin
and the default
password is
access
. You can use a web
browser to change this password.
We recommend Microsoft Internet Explorer 6.0
®
(or higher) or Firefox
®
1.0 (or higher) for
Windows
®
and Safari™ 1.0 for Macintosh
®
.
Please also make sure that JavaScript and
cookies are always enabled in whichever
browser you use. We recommend you upgrade
to Safari™ 1.2 or higher to enable JavaScript.
To use a web browser, you will need to know the
IP address of the print server.
1 Open your browser.
2 Type http:// printer_ip_address /into your
browser (Where “printer_ip_address” is the IP
address of the printer or the print server name).
For example http://192.168.1.2/
See Chapter 2 of the Network User's Guide.
4
Restoring the network
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1 Make sure the machine is not in use, then
disconnect all the cables from the machine
(except power cable).
2 Press Menu, 7, 0.
3 Press 1 to select Reset.
4 Press 1 to select Yes.
5 The machine will restart. Re-connect cables
once this is complete.