Filter
Top Products
Chapter 3
3 - 3
Fax Redial
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Start to try again. If you want to make a
second call to the last number dialed, you can
save time by pressing Redial/Pause and
Start.
Redial/Pause only works if you dialed from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.
How to Fax
Faxing from the ADF
1 If it is not illuminated in green, press
(Fax).
2
Put the document face down in the ADF.
3
Dial the fax number.
Press Start. The machine starts
scanning the document.
Automatic transmission
This is the easiest way to send a fax.
Do not pick up the handset or press
Hook/Hold.
Press Start immediately after dialing. (For an
example of automatic faxing, follow the steps
in Faxing from the ADF on this page.)
Manual transmission
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Pick up the handset
and listen for a
dial tone.
4
Dial the fax number you want to call.
5
When you hear the fax tone, press
Start.
6
Replace the handset.