Brother MFC-J410W All in One Printer User Manual


 
Routine maintenance
43
A
Checking the ink volume A
Although an ink volume icon appears on the
LCD, you can use the Menu key to see a
large graph showing the ink that is left in each
cartridge.
a Press Menu.
b Press a or b to choose Ink.
Press OK.
c Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
d Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh in the
Software User’s Guide.)
Packing and shipping
the machine
A
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, any damage that may occur in
transit may not be covered by your warranty.
IMPORTANT
It is important to allow the machine to
“park” the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a Open the ink cartridge cover.
b Press the ink release levels to release
the ink cartridges and then take out the
ink cartridges. (See Replacing the ink
cartridges in appendix A in the Basic
User’s Guide.)
c Install the green protective part and then
close the ink cartridge cover.