Filter
Top Products
Configuring your machine for a wireless network
32
3
b Press Menu.
c Press Network.
d (MFC-J825DW/J835DW and DCP-J925DW only)
Press WLAN.
e Press Setup Wizard.
f When Enable WLAN? or Switch Network interface to wireless? is displayed, press Yes to
accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g The machine will search for your network and display a list of available SSIDs. Press a or b to display
<New SSID>, and press <New SSID>.
h Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.)
Press OK.
i Press Ad-hoc when instructed.
j Choose and press the Encryption type None or WEP.
Do one of the following:
If you chose None, go to step l.
If you chose WEP, go to step k.
k Enter the WEP key you wrote down in step a on page 31. Press OK. Go to step l. (For information on
how to enter text, see the Quick Setup Guide.)
l To apply the settings, press Yes. To cancel, press No.
Do one of the following:
If you chose Yes, go to step m.
If you chose No, go back to step g.
SSID (Network Name):
Communication Mode Encryption mode Network key
Ad-hoc WEP
NONE —
For example:
SSID (Network Name):
HELLO
Communication Mode Encryption mode Network key
Ad-hoc WEP 12345678