20
→ The entered product ID and the serial number auto-
matically retrieved from the USB card writer module is
displayed.
→ If the upgrade key has been successfully retrieved, the
dialog box shown below appears.
Note:
• If a fi rewall is being used, set it so
that the Internet can temporarily be
accessed while the upgrade key is
being obtained.
Note:
• If the product ID is incorrectly en-
tered, the message “The product ID
is incorrect. Check that a mistake
was not made during typing.” ap-
pears.
• The uppercase letters “I” and “O”
are not used in the product ID.
Type in the 15-digit product ID on the label at-
tached to the CD-ROM case, and then click Next.
Click Next to access our server through the
Internet and retrieve the upgrade key.
Click Next to begin upgrading the USB card
writer module.
PED7_QSG.indb Sec1:20PED7_QSG.indb Sec1:20 02.06.2006 20:07:0602.06.2006 20:07:06