Filter
Top Products
Page 12
Connecting to Your Computer
There are two ways to connect your PocketJet to your computer, via USB cable and via
Infrared ( IrDA). For PJ-562 and PJ-563, you can connect via a wireless Bluetooth.
Via USB Cable
CAUTION: Install the driver software before connecting the printer to the computer
via the USB cable.
1. Install the printer driver. See page 6.
2. Make sure your printer is off before installing the interface cable.
3. Insert the printer end of the cable into the interface connector on the side of the
printer. See example, Figure 7.
Figure 7. Connecting the PocketJet to your computer
4. Connect the other end of the cable to the USB port on your computer.