Filter
Top Products
47
Using P-touch Labeler With a
Computer (for PT-7600 only)
5
5
Using P-touch Labeler With a
Computer (for PT-7600 only)
This P-touch labeler is equipped with a USB port, allowing you to connect it to a
computer running Microsoft
®
Windows
®
. The enclosed CD-ROM contains P-touch
Editor 5.0, which is installed together with the printer driver and P-touch Transfer
Manager.
● P-touch Editor 5.0 is a label-designing software that provides additional
illustration and layout features enabling you to design more elaborate label
templates and create databases. Once these label templates and databases have
been created, they can be downloaded to the P-touch labeler, where they can be
used to print labels.
Installing the Software & Printer Driver
Introduction
Features
☞ The P-touch Editor software and the printer driver must be installed before the
P-touch labeler is connected to the computer or turned on.
☞ Only use the enclosed USB interface cable to connect the P-touch labeler to the
computer.
☞
Only one P-touch labeler model PT-7600 can be connected to a computer at a time.
☞ Although the P-touch labeler can be connected to the computer through a USB
connection, label layouts created in P-touch Editor cannot be printed directly
from the application.
☞ If you encounter installation problems, try connecting the USB interface cable
directly to your computer USB port (and not to a USB hub), or try a different USB
port on your computer.
P-touch Editor
Makes it easy for anyone to create a wide variety of custom labels in
complex layouts by using fonts, templates, and clip art.
Printer Driver
Lets you transfer label designs and graphics to the connected P-touch
labeler when using P-touch Editor on your PC.
PT75007600us.book Page 47 Wednesday, February 27, 2008 2:50 PM