Filter
Top Products
27
STEP
1
STEP
2
STEP
3
For Windows
®
For Macintosh
®
STEP
4
Getting started
Reference Installing the software
Label Overview
Introduction
2
When the installation is completed and
the message “The Software was
successfully installed.” is displayed,
click [Close].
The installation of BRAdmin Light is completed.
Setting your IP Address, Subnet Mask and Gateway using
BRAdmin Light
1
Click [Library]-[Printers]-[Brother]-[P-touch
Utilities]-[BRAdmin Light.jar].
BRAdmin Light will search for new devices
automatically.
If you have a DHCP/BOOTP/RARP server in your
network, you don't have to do the following
operation, as the print server will automatically
obtain its IP address.
2
Double-click the unconfigured device.
The default password is "access."
3
Choose STATIC for the Boot Method. Enter
the IP Address, Subnet Mask and
Gateway, and then click [OK].
4
The address information will be saved to the printer.