Filter
Top Products
Control panel setup
28
3
Restoring the network settings to factory default 3
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
a Make sure the machine is not operating, then disconnect all the cables from the machine (except the
power cable).
b Press Menu, 5, 0.
c Press 1 to select 1.Reset.
d Press 1 to select 1.Yes.
e The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.