Using This Manual
The symbols used in the manual are explained here to ensure proper use of this manual.
Symbols
Caution symbol .........................
CAUTION
This indicates an operation that requires caution when
handling the product. Failure to follow the caution can result in per-
sonal injury or damage to the product.
Next operation symbol...........
Next
This indicates the next page to go to.
Terms Used in This Manual
The instructions in this manual are described using the following drive conguration in Windows.
C: Hard drive
D: CD-ROM drive
Brackets [ ] indicate the names of dialog boxes and the names of menus, buttons, and checkboxes that
can be selected during operations.
The hard disk capacity described in this manual is calculated as 1 GB = 1,000
3
bytes. Operating systems
and applications use the calculation 1 GB = 1,024
3
byte, so the displayed capacity diers.
•
•
•
The copyright of this manual belongs to Bualo Technology, Inc. It is prohibited to copy, reproduce, or modify
this manual, in whole or in part, without permission.
BUFFALO™ is a trademark of Melco Holdings Inc. All other products mentioned herein are the trademarks or
registered trademarks of their respective owners.
The specications, design, and other contents in this manual are subject to change without notice and may
dier from those of the actual product.
Every eort has been made to ensure the accuracy of the information in this manual. If, however, you notice
any missing information or errors, please contact the retailer from which the product was purchased or Bualo
Technology Technical Support.
This product was developed for general oce and household use. Bualo Technology, Inc. shall not be responsible
whatsoever for any damage resulting from the use of this product for a purpose other than general oce and household
use.
Do not use this product in applications requiring a high level of safety, such as systems that are directly
or indirectly related to medical equipment or human safety.
When using this product in mechanical or computer system applications that require higher reliability
than general oce equipment, make every eort to provide a safety design for the system and
adequate failsafe measures.
Follow the operations described in this manual when using this product. Be sure to follow all safety precautions
for handling this product.
Bualo Technology, Inc. provides repair of the product under certain circumstances, but it is not responsible for
any loss or corruption of recorded data during repair. Follow all safety precautions described herein when using
the product as a data recording device, such as a hard disk drive, or when using the product connected to a
data recording device. Be sure to back up all necessary data on a regular basis. Bualo Technology, Inc. shall not
be responsible for any loss or corruption of data as a result of the customer violating the safety precautions or
failing to back up data recorded on the product.
Regarding liability due to default or illegal activities resulting from the use of this product, with the exception
of any intentional or gross negligence on the part of Bualo Technology, Inc., Bualo Technology, Inc. shall
compensate the customer up to the purchase cost of the product.
If this product is deemed defective, Bualo Technology, Inc. shall repair the product at no cost or replace the
product with the same or similar product. Bualo Technology, Inc. is not responsible for any damage as a result
of a product defect.
■
■
■
■
■
•
•
■
■
■
■