Filter
Top Products
CE Labs, Inc. SW204HD Matrix Switch
SPECIFICATIONS SW204HD
VIDEO
Nominal Input level: 1 Volt peak to peak
Gain: 1 Volt into 75 ohms (2 Volts Unterminated)
Input Impedance: 75 ohms
Output Impedance: 75 ohms
Isolation port to port: >40 dB
Isolation on to off: >60 dB
Return loss: >18 dB
Video bandwidth: > 100 MHz (HDTV requires 37MHz min.)
AUDIO
Analog:
Nominal Input level: 1 Volt peak to peak
Gain: Unity (one to one)
Input impedance: 22k ohm
Output impedance: 100 ohm
THD: 0.05%
Frequency Response: 20Hz to 100kHz
Channel Separation: >75dB
Port to Port Isolation: >50dB
Out to Input Isolation: 60dB
Signal to Noise: 80dB @ 2 Volts out
Digital:
Supports Standard SPDIF digital audio.
Unity gain when terminated into 75 ohms (2X gain into high impedance.).
Greater than 75 MHz of bandwidth to ensure minimal degradation.
(If not used for digital audio, this port can be use to switch standard composite video.)
POWER:
Requirement: External 120 Vac input, 9 or 10 Volt AC output @ 1000mA with a
2.1mm coaxial connector.
ACCESSORIES:
1 Power Supply
2 Rack Mount Ears
1 Application CD
1 IR Remote Control
1 Manual
Dimensions:
1.75 x 5.5 x 14.6
Weight:
3.7 pounds