Cabletron Systems 2E42-27R Switch User Manual


 
Completing the Installation
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 3-17
3.5 COMPLETING THE INSTALLATION
After installing the 2E4X-27 and any optional Fast Ethernet Interface
Modules and HSIM as appropriate, and making the connections to the
network, proceed as follows:
1. Secure the cables by running the cables along the strain-relief bracket
and tying them to the strain-relief bracket using cable ties.
2. The 2E4X-27 is now ready to be set up through Local Management.
Refer to Chapter 5, Local Management, for information on how to
access and use Local Management to configure the 2E4X-27.