Filter
Top Products
Chapter 5: Local Management
5-4 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
5.3.1 Console Cable Connection
Use the Console Cable Kit provided with the 2E4X-27 to attach the
management terminal to the 2E4X-27 COM port as shown in Figure 5-1.
Connect an IBM PC or compatible device, running the VT terminal
emulation, to the 2E4X-27 as follows:
1. Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 2E4X-27.
2. Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3. Connect the RJ45-to-DB9 adapter to the communications port on
the PC.
Figure 5-1 Management Terminal Connection
RJ45 COM Port
RJ45-to-DB9
PC Adapter
UTP Cable
with RJ45 Connectors
PC
196050
1
2
3
4
5
6
7
8
11
12
13
14
15
16
9
10
17
18
19
20
21
22
23
24
COM
PWR
CPU
RESET
1X 3X 5X 7X 9X 11X 13X 15X 17X 19X 21X 23X
2625
2E42-27