Filter
Top Products
Chapter 3: Installation
3-2 2E43-51/2E43-51R User’s Guide
3.2 UNPACKING THE 2E43-51
To unpack the 2E43-51 and verify the contents of the shipment, proceed
as follows:
1. Open the carton and remove the packing material protecting the
2E43-51.
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the black and yellow tape seal on the non-conductive bag to
remove the 2E43-51.
4. Perform a visual inspection of the device for any signs of physical
damage. If there are any items missing or damaged, contact the
Cabletron Systems Global Call Center as described in Section 1.6.
3.3 INSTALLING OPTIONS
Table 3-1 Contents of 2E43-51 Carton
Item Quantity
2E43-51 1
Antistatic wrist strap 1
Console Cable Kit 1
RJ21 Angle Adapter 4
Rackmount Kit 1
Strain Relief Bracket 1
Release Notes 1
Power Cord (2E43-51 only) 1
Power Cord (2E43-51R only) 2
NOTE
Install any optional equipment before proceeding to
Section 3.4.