Filter
Top Products
Completing the Installation
3-6 Installation
e. Ensure that the twisted pair connection meets the dB loss and cable specifications outlined
in the Cabletron Systems Cabling Guide. Refer to Related Manuals in the About This Guide
preface for information on obtaining this document.
If a link is not established, contact Cabletron Systems for technical assistance. Refer to
Section 1.2 for details.
4. Repeat steps 1 through 3 above, until all connections have been made.
3.5 COMPLETING THE INSTALLATION
After installing the SmartSwitches and any optional HSIM or VHSIM, the module is now ready to
be set up through Local Management. For information on the Local Management connection,
configuring the 6C105 chassis and module, and using Network Tools, refer to the Local
Management User’s Guide.