Cabletron Systems 12 Switch User Manual


 
2-7
Installing the 9E428 and 9E429 Modules
The Reset Switch
The Reset switch is located on the front panel, under the top plastic tab as shown
in Figure 2-4. It serves three functions: resetting the i960 processor, shutting down
the module, or restarting the module.
To reset the i960 processor, press the reset switch twice within three seconds.
To shut down the module, press and hold the reset switch down for three or
more seconds.
To restart the module after it has been shut down, press and release the Reset
Switch.
For security, SNMP management can be used to disable the functions of this
switch.
Figure 2-4. The Reset Switch
Reset Switch