Filter
Top Products
Using LM to Create PVCs
BRIM-A6 User’s Guide Page 3-11
3.3.5 BRIM-A6 Add/Delete Entry Screen Fields
The BRIM-A6 Add/Delete Entry screen lets you add, delete, or modify
PVCs. This screen does not let you clear SVCs from the Connection Table
screen.
The following list explains each of the BRIM-A6 Add/Delete Entry
screen fields:
VPI
Use this field to enter the VPI of the PVC you want to add, delete or
modify. This field allows values of 0-3.
VCI
Use this field to enter the VCI of the PVC you want to add, delete, or
modify. This field allows values of 0-1023.
AAL Type
Use this field to select the ATM Adaptation Layer for the PVC you want
to add, delete, or modify. Press the SPACE bar to toggle selections 5
(AAL-5) and 3/4 (AAL-3/4). The default selection is 5.
Encapsulation Type
Use this field to select the data encapsulation type used over AAL-5. Press
the SPACE bar to select VC Mux Bridged 802.3 or LLC Encapsulation.
The default selection is VC Mux Bridged 802.3.
NOTE
Connection 1 (VPI-0, VCI-14) and Connection 2 (VPI-0,
VCI-15) are used by Fore Systems SPAN signalling and can
not be deleted from the Connection Table screen.
book Page 11 Thursday, April 18, 1996 2:18 PM