Filter
Top Products
9033029 Product Overview 3
Figure 1-2 shows the port Link, Speed and Collision LEDs. The port LEDs
are grouped to the left of their corresponding RJ-45 ports. Table 1-2
defines the performance of the port LEDs.
Figure 1-2. Port LEDs
Table 1-2. Port LEDs Defined
Rear Panel
Figure 1-3 shows the ELS100-8TXUF2 rear panel, which includes a
connector for the DC power adapter.
Figure 1-3. ELS100-8TXUF2 Rear Panel
LED Function
Link LED On: Indicates a valid connection (link) on the associated port.
Off: Indicates no link on the associated port.
100 LED On: Indicates the port is in the 100Base-TX mode.
Off: Indicates the port is in the 10Base-T mode.
Collision LED Flashing: Indicates packet collisions detected on this port.This is a nor-
mal situation for CSMA/CD Ethernet. Note that collisions do not occur
on full-duplex links.
Off: Indicates no packet collisions detected on this port.
ELS100-8TXUF2.book Page 3 Friday, June 4, 1999 4:01 PM