Filter
Top Products
9033029 Installation 13
100Base-FX Fiber Ports
The 100Base-FX Fiber port uses SC connectors. Figure 2-4 shows an SC
fiber connector being inserted into the fiber port on the ELS100-8TXUF2.
Figure 2-4. Inserting a Dual SC Connector into a Port
This port supports multi-mode 62.5/125mm fiber. The 100Base-FX port
uses SC fiber connectors. The SC fiber connectors are configured as a
receive (RX)/and transmit(TX) pair. The RX connector positioned on the
left side of the port and the TX connector on the right side of the port.
ELS100-8TXUF2.book Page 13 Friday, June 4, 1999 4:01 PM