Filter
Top Products
6-12
ELS10-26 MIB
lxswdisWriteStatus {lxswdis 3}
Integer Read-Only
The status of the erase/write operation. The possible values are:
• in-progress (1) - An operation is currently in progress.
• success (2) - The last operation completed successfully.
• config-error (3) - Configuration EPROM encountered an error.
• flash-error (4) - Flash EPROM encountered an error.
• config-and-flash-errors (5) - Both Configuration EPROM and
Flash EPROM encountered errors.
lxswdisConfigIp {lxswdis 4}
IP Address Read-Write
The IP address of the NMS (i.e., any IP host) that is allowed to use
TFTP to send/retrieve the configuration file of the ELS10-26. A
value of 0.0.0.0 (which is the factory specified default) prevents
any NMS from obtaining access, while a value of 255.255.255.255
gives every NMS permission.
lxswdisConfigRetryTime {lxswdis 5}
Integer Read-Write
The number of seconds that the ELS10-26 will wait for an
acknowledgment before it retransmits an unacknowledged TFTP
data block. The factory specified default is 5 seconds.
slxwdisConfigTotalTimeout {lxswdis 6}
Integer Read-Write
The number of seconds that the ELS10-26 will wait for an
acknowledgment to a data block before it cancels a TFTP session.
The factory specified default is 25 seconds.