Filter
Top Products
ELS10-26 MIB
6-33
• critical (5)
lxtrapSeverityEnable {lxtrapSeverityControl 2}
Integer Read-Write
Allows you to enable or disable all traps of a given security level.
The values are as follows:
• enabled (1)
• disabled (2)
lxtrapIncludeText {lxtrapMgt 3}
Integer Read-Write
Indicates whether or not a formatted text string is included in the
trap PDU. Values include:
• true (1)
• false (2)
lxtrapTime {lxtrapMgt 4}
Time Ticks Read-Write
The time, in centiseconds, which should expire between the
sending of traps. The default value is 100 centiseconds.
Note: This MIB variable (lxtrapTime) replaces sysTrapTime.
lxtrapRetry {lxtrapMgt 5}
Integer Read-Write
The number of times any enterprise-specific trap is to be sent for a
given event. PDUs are retried using a truncated exponential back
off: 2 seconds, 4 seconds, 8 seconds, 16 seconds and then 32
seconds for all succeeding intervals. The default value is 1 retry.
lxtrapEntryNumber {lxtrapMgt 6}
Integer Read-Only
The number of traps that are in the lxtrapTable.