Filter
Top Products
NBR-SERIES Installation Guide Page 3-1
CHAPTER 3
INSTALLATION
This chapter contains the following procedures:
• Unpacking the NBR
• Preparing the NBR for installation
• Installing the NBR
• Connecting the NBR to the power source
• Connecting the NBR to the network
3.1 UNPACKING THE NBR
Unpack the NBR as follows:
1. Remove the packing material covering the NBR.
2. Carefully remove the NBR from the shipping box.
3. Visually inspect the NBR. If there are any signs of damage, contact
Cabletron Systems Technical Support immediately.
Only qualified personnel should perform installation
procedures.