Filter
Top Products
Using the LCD
NBR-SERIES Installation Guide Page 4-9
4.3.3 Alarm Messages
Alarm messages pertain to events that occur within the NBR. The
messages that can be displayed are shown in this section.
To Display the Messages
There are two ways to gain access and display the Alarm messages:
• From the product name display
Press and hold the DISPLAY button for 3 seconds while the product
name is displayed. When the button is released, the display steps to the
saved Alarm messages. Thereafter, each time you press the DISPLAY
button, the next message is displayed.
• From a Static System message display
Press and hold the DISPLAY button for 3 seconds while a Static
System message is displayed. When the button is released, the display
steps to the Alarm messages described. Thereafter, each time you
press the DISPLAY button, the next message is displayed.
To Exit
There are two ways to exit the Alarm messages:
• Automatic 20-second exit
Allow 20 seconds to elapse after the last DISPLAY button operation.
The display returns to the product name.
• Jump to Saved System messages
Press and hold the DISPLAY button for 3 seconds. When released, the
display steps to the Saved System message described in Section 4.3.4.
NOTE
Whether you are displaying Static System messages, Alarm
messages, or Saved System messages, the display returns to
the product name display 20 seconds after the last operation of
the DISPLAY button.