Filter
Top Products
INSTALLATION
Page 3-13
3.8.2 Installing a TPIM to the TRXI
To install a TPIM, perform the following steps:
Caution: Observe all static precautions while handling TPIMs.
1. Remove the mounting screw from the faceplate of the RI/RO port
on the TRXI.
2. If you are replacing a TPIM, remove the mounting screw and pull
the TPIM straight out from the TRXI.
3. Slide the new TPIM into place as shown in Figure 3-12.
4. Ensure the connectors on the rear of the module and on the inside
of the TRXI mate properly.
5. Reinstall the mounting screw.
Figure 3-12. Installing a TPIM
RI
RO
6
5
4
3
2
1
18
17
16
15
14
13
TPIM-T1
LNK
TPIM-T1
LNK