Filter
Top Products
LOCAL MANAGEMENT
Page 5-14
The following sections provide a brief explanation of each field on the
SNMP Community Names screen and instructions for using them.
Component Name
Displays the component name as TRXI Chassis Manager.
Community Name
Displays the Community Name or “password” to Local Management.
Access
Displays the access level accorded to each community name. The
following list defines each access code:
Read-Only This allows read-only access to Local Management,
but excludes access to security protected fields of the
upper levels of authorization (Read-Write or
Super-User).
Read-Write This allows you to read and write to Local
Management fields, excluding IP Address, Subnet
Mask, and Community Names and Ring Security.
Super-User This allows read-write access to all modifiable
parameters including Community Names, IP
Addresses, Traps, Ring Security, and SNMP objects.
Editing the Community Name Field
To edit the Community Name field:
1. Use the arrow keys to highlight the Community Name field.
2. Enter the password, up to 26 characters in length, into the field. If
you press Return without entering a password, the field defaults
to Public.
3. Use the arrow keys to highlight the SAVE command at the bottom
of the screen.
4. Press Return. The “SAVED” message appears indicating that your
changes have been saved to memory.